How To Buy A Skateboard In 9 Simple Steps

Are you looking to buy a skateboard for the first time?

Feel lost?

Glad you stopped by, because I feel your frustration! To understand differences between brands, sizes, shapes, and finally contemplate the price tag? This daunting task took me ages to figure out.

I solved the problem by upgrading parts and trying various brands over the years.

Battling this frustration allowed me to establish extensive insight to avoid earlier mistakes. This guide will steer you in the right direction.

Before we dive into detail, here’s an overview on what you need when buying a skateboard for the first time.

1. Create A budget. 

2. Where to buy a skateboard.

3. Choose type of skateboard.

3. Pre-assembled VS custom.

4. Choose a deck. 

5. Select Hi-grade trucks.

6. Long lasting wheels. 

7. Basic bearing set.

8. Durable hardware.

9. Grip Tape.

1. Create A Budget

For parents out there, one problem of concern, is whether your child will enjoy skateboarding.

The solution? Buy a cheap $30 skateboard instead! This mindset will only cause trouble because quality is key. One concerned parent brought up a valid point on Reddit.

My husband and I have always been of the mindset that if it isn’t fun to play/ride, the child won’t enjoy it enough to get good at it. For this reason, we try to buy good quality instruments and bikes and such. We also dig safety. 🙂 However, I don’t want to spend a bunch of money on a skateboard if she will not have a passion for it. Is there a happy medium somewhere? A well-made board that won’t break the bank?

My buddies and I began riding around on cheap boards from Toys R Us. I never thought I’d develop a passion for skateboarding until the people I met inspired my ambition to continue fourth.

Those who continue to pursue, I recommend saving money. Find a way to set aside $100, because life happens.

  • Broken boards
  • Bearing cages crack
  • Destroyed shoes
  • Broken truck axle plates
  • Stolen board (the worst!)

2. Where To Buy A Skateboard

There are 2 common places to find skateboarding equipment.

Local Skate Shop

A local shop may be available, jump on Google and search “Nearest skateboard shop”. What pops up near me is an exemplary example where we run into issues.

skateshop_locations

There are 3 problems I ran into here.

Problem #1:

Eastern Pulse is a small local skater owned shop for the past 20 years. As a regular, I preferred doing business with them.

They distinguished the signs of decline with bone dry inventory, and hours were not exact. Hey, I give HUGE credit to a dad of 3 keeping his baby alive.

Problem #2:

Search results populated related stores, “Skaters Landing” is an ice skate sporting goods store. No skateboards here!

Problem #3:

Corporate run skate shops, Zumiez, serves 693 locations, and is a controversial topic of discussion. We can find reasons online, but mostly because they put core shops out of business.

They establish most stores inside local malls. If you want a board today, this is the fastest option.

Online

There is no doubt buying a skateboard online is convenient, you can score the best prices. Many of the best online skate shops offer blowout deals in their “Sale” sections.

3. Choose Type Of Skateboard

Types Of SkateboardsReasons To Buy
Park/StreetMost common type of skateboard best for learning technical tricks or on transitions (ramps/mini-ramps. Consider one for attending lessons, or at the skatepark.
CruiserBest for those intermediate skaters who look for a setup for riding down crusty streets, basic travel to class or bombing hills. These offer significantly smoother ride and increased stability with wider deck, trucks, and bigger wheels.

Plenty of people skateboard that aren’t interested in going to the park, or learning tricks. Rather, use this device to commute to class, blast down city streets/hills for fun. Whatever the case may be, there’s a board for almost anyone.

Pre-Assembled Vs Custom

Here are money saving alternatives.

Pre-Assembled

A pre-assembled complete is cost effective. A superb choice if you don’t wish to assemble yourself. Although, you can’t select your own parts.

They arrive with the following parts.

  • Generic bearings: Standard Abec 5 rated bearings work fine. These will last with proper upkeep.
  • Standard trucks: Mid-grade trucks are ok for starters, when ripping on top of rails and ledges, they are prone to hang-ups (sticking to objects).
  • Wheels: Brand wheels are likely arriving in beginners recommendation (52mm, 95a/99a durometer).
  • Deck: Basic blank, or team deck. Quality is as good as pro-model.

Custom Build Your Own 

Custom building your own skateboard allows you to choose your own parts individually. There are 5 parts to select.

  1. Deck
  2. Pair of trucks
  3. Set of wheels
  4. Box of bearings
  5. Griptape

4. Choose A Deck

With hundreds to choose from, where do you start?

I broke decks often, so this became routine. Over time, I developed vast product awareness and knew what worked best for me. The features I drilled down on helped made this better understood.

  • Size
  • Construction
  • Brand
  • Cost

There are variations of deck sizes to choose from. Features vary in width, length, and change how a board respond.

Size

How width affects performance changes drastically.

Wide Skateboard Decks:

  • Increase stability and control.
  • Greater area for foot placement for tricks.
  • May be easier to land and catch tricks.
  • Best for transition skating.

Narrow Decks:

  • Lighter
  • Easier to flip.
  • Ideal for younger kids with smaller feet.
  • Greater chance of breaking.
  • Harder to control.

As a beginner, you need to focus on width. When I started skating at age 12 to around 16, the board size that performed best for me was a 7.5”-7.75.”

Although, as I grew up, I found that sizing up to a size 8” deck fit perfect.

My Recommendation

For a novice, a 8″ popsicle board is common to start with. This is a good starting position that you can alter in between sizes later on.

Construction

They make all skateboard decks from 7 -layers of “hard-rock maple”, and one of the strongest woods available. However, there are flaws.

  • Pre-mature breakage
  • Wood becomes weak and becomes “soggy” and flat.

Improved designs counter and decrease these problems. Only a few are worth the extra few bucks.

Brand

There are many brands out there, so many epic eye-catching graphics. Where to even begin? I always try new brands because each behold distinct characteristics that I stumble upon. How do you choose a brand, though?

  • Choose a size first to narrow selection.
  • Pick a graphic that interests you or pro rider.

How Much Should You Spend?

I always find the best price possible. The only time I go over budget is on new technology, or sick graphic. Otherwise, I stay under $50, go with a blank or shop deck.

5. Select Hi-Grade Trucks

There are performance benefits each truck brand offers. The initial thing is to assure they fit the deck you chose.

Height

Skateboard trucks have 3 height levels. The differences alter how a board turns, grinds, and trick performance. Whether this affects performance is controversial, but I have found this to be true.

  • Higher trucks increase overall distance one end of the board takes to hit the ground. The increased leverage is believed to increase “pop” with tricks like ollies.
  • Mid size trucks are a sweet spot for those all-around skaters.
  • Low trucks create an opposite effect, enabling greater response.

A higher truck works best taller dudes like myself, where lower trucks feel awkward, and too low to the ground.

The time taken to snap the board down performing tricks is generous enough. A shorter person, or younger skater, may find low trucks to fit this timing factor. In either case, leg strength will be the number one way to improve performance.

6. Long Lasting Wheels

Wheels are created from urethane, a compound that changes speed, acceleration, and sliding capabilities.

Features Include:

  • Wheel size.
  • Durometer.
  • Contact Patch.
  • Technology.

Wheel Sizes

Wheels are measured in millimeters (mm) ranging from 48mm-60mm+.

  • Smaller wheels (50-53mm) are great for street skating. They are lighter, easier to flip tricks. Acceleration is slower, but provide higher top speeds.
  • Medium wheels (54mm-59mm) are stable, and the best option to start with.
  • Bigger wheels (over 56mm) are suitable for cruiser boards for battling rough territory.

Durometer (Hardness)

Durometer measures wheel hardness.

  • Harder wheels initiate quicker into a slide, providing optimal sliding performance, overall they last longer, and best for smooth surfaces.
  • A softer wheel sheds quicker, slower on smooth surfaces, but provides maximum grip.

Contact Patch

Once you’ve settled on size and durometer, the last feature is contact patch, or the width.

Slimmer wheels between 15mm-17mm are outstanding for park and street skating. They may roll slower, but easier to control momentum. Since a skinnier wheel grips less, this makes powersliding easy.

  • Wider contact increase stability and better for landing tricks. They offer better grip, higher top speed, and ride better on rough surfaces.

Wheel Technology (Formulas)

A whole science goes into developing special formulas to improve performance and durability. My favorite one has been Spitfire Formula 4 because they never flat spot, and superb grip.

7. Basic Bearing Set

Bearings help wheels spin. The inner balls inside spin and made from steel. Top end bearings use ceramic internals to increase durability and reduce weight.

  • Abec 5 rated is the standard skateboard bearing applied to complete skateboards.
  • Skate Rated bearings, designed by Bones and one of the best brands in the industry. They designed this rating system for skateboarding.

8. Durable Hardware

Hardware attaches your deck to your board. There are different bolts and sizes to select.

Types Of Bolts

Philips head is my favorite, and easier to locate tools if lose yours.

Allen bolts are the 6 sided hexagonal shaped tops that were always a pain for me to find the right tool for (misplacing my tool).

Hardware Sizes

  • I recommend 1” all around just in case the need to slap risers on.
  • Use corresponding bolts (if using risers). For example, 1/4” riser require 1 1/4″ bolts.

9. Grip Tape

A fresh piece of grip prevents slips, helping feet stick nice and snug while banging out kickflips or maybe bombing hills. For you first timers, applying grip is difficult. Consult a local shop, friend, or hit up YouTube for directions. Most common issues involve uneven placement and bubbles.

  • Perforated grip allows bubbles from forming upon application.
  • Non-Abrasive grip is a recent concept, one I have not tried. Others mention the feel differs from normal grip and designed to prevent shoes from ripping.

Riser Pads/Shock Absorbers

Riser pads are unnecessary, but good to have in case you upgrade to bigger wheels later on. Bigger wheels, or loosening your trucks increased chances of wheel-bite. A set of risers reduces this risk.

  • Absorbs/dampens vibrations from rough terrain.
  • Angled risers alter turning response and geared more towards cruisers/longboards.

Common Problems That Affect Skateboarding Performance

  • Wheelbite is caused when wheels touch the bottom of the board, leading to an abrupt halt.
  • Skateboard turns by itself: Triggered by trucks being too tight/loose, worn bushings, or bent axles.
  • Board is troublesome to push: Caused by warped bearings due to water damage, leading to rust, flat spots on wheels, or axle nuts too tight (even slightly).
  • Cracks forming down the board: These are called pressure cracks, formed from the trucks over time, pressure from constant wear and tear.
  • Dirty grip tape: I have stepped in dog poop, mud, rode through dusty areas… one of those events that occur when least expected!

What Makes A Good Skateboard?

We can upgrade all skateboard parts over time, although a setup that boasts superior quality includes the following.

  • A deck size that fits according to rider’s size
  • Trucks made from quality materials for optimal board control
  • Durable wheels designed to cover specific terrain without shredding apart
  • An effective bearing for long lasting roll

Now you have a skateboard, there are 2 other suggestions before we wrap up.

Like  anything else (even sports) skateboarding requires shoes and protective gear to get started.

Additional Skateboard Gear To Buy

Skate Shoes

They design skate shoes to withstand abuse from grip tape, and impact. The issue is finding a durable shoe that’s affordable and comfortable. I’ve had shoes last a couple days before buying a fresh pair. To avoid this mistake, there are several that I recommend trying out.

My Favorite Brands

  • Emerica
  • Vans
  • Es

Protective Gear

Anyone who plans to take lessons or hit up the local park should start with pads. There is a 100% chance you’ll wreck yourself for the first couple months. Not to mention that local parks may require pads and a helmet.

Recommended Brands 

  • Pro-Tec
  • JBM
  • Triple Eight

What Are The Best Brands?

I’ve heard this question asked handfuls of times, and the answer is subjective. Skateboarding is what you make it. The best skateboard brands are the ones inspired by local, and professional skaters alike.

However, from a product standpoint, these are things to consider.

  • 30 day warranty against deck breakage
  • Wheels that perform better than others on similar surfaces
  • Trucks with superior durability and grind as smooth as butter
  • A deck shape that has exceptional response
  • Shoes that last and hug the board a certain way others don’t

Conclusion

It can be hard buying a skateboard for the first time. The local shop is an exceptional place to start and meet those passionate about skateboarding. I highly recommend a high-quality setup, and to explore new brands.