Skateboards For Big Guys

I can claim growing older has slight disadvantages. Having gained  over 25lbs over the past couple years. As an activity skateboarding has had a tremendous influence maintaining an active lifestyle, and consistency becomes a test.

Having spent 2 years barely skating,  got me stuck me in a gloom I yearned to slither away from. Relearning tricks is electrifying, with a thought of being able to say, “OMG I still got this!” For any of you big guys new to skateboarding, or looking for an escape, this guide provides details on how to pick the correct setup for you. Whether for tech skaters, or just searching for a nice cruiser.

Common Questions Or Concerns:

  • How much weight can a skateboard hold?
  • Am I too heavy to skateboard?
  • How does weight affect performance?
  • Can I lose weight skateboarding?
  • How Much Weight Can A Skateboard Hold?

Even for burly hairball sasquatch people… no limit on your weight should stop you from picking up the board. If you’re worried about constantly breaking boards, this won’t be an issue as decks can withstand the weight of a car driving over them. Unless if you’re landing on the nose or tail frequently over stairs and gaps.

Am I too “heavy” To Skateboard?

A question often asked within the skateboarding community. My response to those will frequently be “Don’t let how you look define you, just go have fun!” Although telling one this isn’t satisfactory enough to inspire action.

So, I found skaters to help motivate and inspire you to make it happen.

Skatemasternate started off at 400 pounds, saw change was achievable. Picking up skateboarding was the means to remain excited. He’s dropped over a 100lbs, proving a skateboard can hold larger  individuals, all while losing tons of weight.

Skater Stimm a 34-year-old gentleman who got back into skateboarding after 20 years. Along with shedding a couple pounds, he’s committed his life to pick up skateboarding all over.

How Does Weight Affect performance?

It can influence performance several ways. The bigger you are, increases momentum, permitting one to attain higher speeds quicker down ramps, or carving bowls. Balance may be a challenge for bigger guys. Learning how to distribute body weight takes time, as well as proper foot placement. With this in mind, a wider board allows greater stability and control.

A disadvantage for bigger, taller skaters, is falling on your face. Slamming on the ground, sacking rails, twisting ankles, is an inevitable part of any physical activity pursuits. The biggest outcome emerges with developing confidence and overpowering fear.

For those returning…

Some of you have been gathered by powerful foreign forces, summoning you to skateboard once again. Others, may have never stepped foot on a board. So, let’s see what to consider when determining a proper skateboard setup.

Choosing A Skateboard 

Finding the greatest performing decks takes time. To understand locating the correct board based on size and weight of an individual, ask yourself what style of skateboarding, such as street, cruising, transition (pool/bowl). Truth is, when you become mature, you purchase more boards, and skate less. Here, personal preference shows itself the more you skate.

For example, I prefer a board between 7.75”-8” for the park or street as this performs best for tricks. Although not a magnificent transition skater, a much larger board for carving ramps promotes better stability and control.

A new deck I picked up was a recent pro model from Blind. By surprise this happens to be Jordan Maxhams first board release. I grew up in Vermont, skating the same park got me stoked to seize this board right away. The only drawback was the width (8.25”).

Having only riding 8” wide boards for so long, this just didn’t hit the spot because the slight variation made flipping the board more challenging on flat ground, although worked well skating transition.

One notable part I never payed attention to was wheelbase. I’ve devoted a decade buying new boards from different brands, technology, but never knew the purpose.

Wheelbase

  • Longer wheelbases make a board feel longer, and heavier as we arrange the trucks closer to the end the deck, lifting the board higher.
  • Shorter wheelbases make a board feel more shallow, supporting for a more responsive board, although may diminish pop. Stronger DecksMost brands provide a technology to enhance durability.

Deck Technologies For Durability 

I have tried decks made from aluminum, 9-layer decks, and binged on Lib-Tech boards that were fiberglass shields! It’s totally ingrained in our mindset, to at some point find that longer lasting piece of wood. From my experience, a regular deck works just fine all while saving money.

Recommended Skateboard Deck Brands

Listed are a few brands which design awesome boards that fit well with all-around skating styles. For a solid, strong board with good deal of size preferences, these top 5 compliment this category well.

  • Creature
  • Anti-Hero
  • Polar
  • DGK
  • REAL

Trucks And Bushings For Heavy Skaters

In the recent 10 years, I rode Krux. Prior to that, were Destructos, Phantom 2, Royals, Grind King, and a few others. For those just starting out, I’ll be straightforward and agree Independents are one of the most favored. Although, in the past, found them to be heavy, and tougher to do tricks. Until recently, found a sick pair of Indy hollows I HAD to have- which matched my deck. In addition, let’s go over complications that can arise.

  • Bent/cracked axles
  • Cracked hanger
  • Cracked baseplate
  • Loose/broken kingpin

I have run across issues personally, and other skaters have too. Although these occurrences can appear at random. From personal experience, I’ve only replaced trucks twice. The first reason was defective design (Phantom 2), and a second time was my first Toys R Us board (for distinct reasons).

It’s rarely sight to experience higher quality truck axles or hanger break/fracture/snap considering most guarantee against breakage. With this being stated, feel free to reach out to the manufacturer with the following issues. One carries a higher chance snapping kingpins and cracking baseplates. Thankfully, parts are sold separately if needed.

Bushings

They make bushings from polyurethane which dry out and crack overtime. Stock bushings are acceptable, and last awhile. Improving ride quality by tweaking a few details can completely transform performance.

Improve Truck Performance

  • Stay away from poor quality trucks made from plastic, or cheap metals can snap and be nasty. Switch stock bushings (Riders over 200lbs) to Bones hardcores. This presents a more responsive, smooth riding experience.
  • Longer bolts (hardware) are easier to keep record of. When loose, jingling is more noticeable, allowing to tighten them up before total loss.

Having spent endless hours skating the local indoor park, my biggest gripe is locating a wheel with an ideal speed vs grip ratio combination. I’d either end up having a grippy wheel that wasn’t quick, or a fast wheel with poor grip. Two popular contenders skaters opt for are Bones and Spitfire wheels. In the past, I’ve been fond of Ricta wheels for years.

My first set were super crystals, which they sold me on by the clear see-through presentation. The destruction began as dirt built up began decreasing the “cool” factor. I’ve learned performance over appearance is key to establish the best setup.

Factor The Terrain In Your Area

Indoor parks are smooth, supporting surfaces to build enough dust forming a tricky situation. A nice-balanced wheel maximizing speed and grip is what you crave. It’s taken time to hit the head on this one.

  • A softer wheel soak up rough surfaces best.
  • A wider wheel profile can further settle issues with of pebbles, and other defects upon travel.

Terrain can differ with outdoor parks. Asphalt sucks, but is cost efficient, functions better in cooler conditions than concrete. The mixture of stone, sand, and gravel overtime chip away, crack, and With this being expressed, deterioration happens faster than concrete, and no fun to wipe out on!

Skating rough asphalt most of my beginner years, I recommend picking up a decent set of wheels (99a)(53mm-56mm). If riding low trucks, bigger wheels are prone to wheelbite. Risers can reduce this risk. Transitioning to cruiser can be done with longboard wheels is another option.

Best Complete Skateboards For Heavy Riders

(Trick Skating)

1.Creature Gravette Tales Of Glow

Creature is an iconic figure in the skateboarding industry. With big, beefy boards, steep concave and one of the first to establish “horror” theme graphics. Distributed, and manufactured by NHS, and perceived reputation holds firm in the skate community as one of the best on the market. Not to mention, this board glows in the dark!

2.Powell-Peralta Ripper Pastel

Another staple setup to introduce to the mix arrives from a long-standing brand. They’re a ruler in creating some of the greatest quality boards on the market as together with their flight decks.

3.Blank Completes

I usually recommend blank options for starters if not dead set on how often used. Not simply are you saving cash, but opportunities to upgrade parts down the road.

Cruisers For Heavy Riders

Cruiser skateboards are a superior choice for alternative transport. You can even have fun even if technical trick skating isn’t your style. A practical choice would to have a cruiser on hand for traveling around rough areas around the downtown. A normal skateboard is not as versatile, and can be slightly unpleasant on these surfaces.

Also recognized as a mini cruiser, these setups have bigger, softer wheels to conquer challenges like rocks, pebbles, and serious cracks in the walkway. Heck, you can fly over dirt and yet be fine! Two considerable options are feasible to further decipher which one works best for you.

Tugboat VS Dinghy

Dinghys are one of the most popular options, sizes run (28” long) and (8” wide).

  • Fast around sharp turns, street corners.
  • Lighter option for those who like a piece that’s not too heavy
  • In relation to size, furnishes the feel of a regular skateboard

Tugboats are bigger, coming in at (30” long) and (9.25” wide).

  • Best for bigger riders, and better surface space to ward off feeling cramped on long expeditions.
  • Handles terrain very successfully, and excellent for bombing hills.
  • Additional length, and wider trucks provides better stability with extra pleasure at greater speeds over Dinghy.

Additional Boards For Commuting

Other alternatives to consider outside the skateboarding niche, include, longboards, electric skateboards, and others I’ve marked out the types of skateboards to elect from. Given these cases, one can look at these because:

  • A board capable to cover VAST terrains, bearing off-road capacities.
  • Boards best fit for traveling LONGER distances without stress.
  • A setup that maximizes stability and control for comfort

Conclusion

With all things considered, whether you are 100lbs or 360lbs, a skateboard can hold almost everybody. The conclusion here is figuring out what style fits riders needs, and constructing the correct size to encourage the chances of choosing a solid, yet comfortable cruise.